| Size: | |
|---|---|
| Quantity: | |
TGM-M-10009
ZZJD
8414909090
Product Description
Applications for Tungsten Alloy Cylinders
Tungsten alloy cylinders can be easily used for car weighting by drilling one or more 25/64" or larger diameter holes into the block and then inserting the desired number of cylinders. The hole can then be plugged with a piece of 3/8 inch dowel rod. The product also is manufactured as the parts of military defense, extrusion die, various counterweights, such as yacht counterweights, vehicle counterweights, airplane counterweights, helicopter counterweights, boat counterweights, tank counterweights, etc.
Usually, tungsten alloy cylinder could be manufactured as the parts for military applications, extrusion die and various kinds of counterweights.
Tungsten Alloy Cylinder Specification:
1. Diameter: 2.0-100.0mm
2. Length: 50-1000mm
3. Density: 16.5-18.75 g/cm3
4. Composition: W content: 85-99%, W-Ni-Fe, W-Ni-Cu
5. Surface: Sintered surface, Forged surface, Ground surface
Tungsten Alloy Cylinder Data Sheet
Grades | Density g/cm³ | Hardness HRC | MPa Tensile strength MPa | Elongation% | Impact toughness MJ/m² |
W273 | 17.10±0.15 | ≥23 | ≥900 | ≥24 | ≥1.30 |
W263 | 17.25±0.15 | ≥23 | ≥900 | ≥23 | ≥1.20 |
W253 | 17.40±0.15 | ≥24 | ≥900 | ≥22 | ≥1.10 |
W243 | 17.60±0.15 | ≥24 | ≥920 | ≥20 | ≥0.90 |
W232 | 18.10±0.15 | ≥25 | ≥920 | ≥14 | ≥0.45 |
W231 | 18.30±0.15 | ≥26 | ≥920 | ≥12 | ≥0.30 |
W221 | 18.50±0.15 | ≥27 | ≥920 | ≥10 | ≥0.22 |
WNiCu | 16.00-18.50 | ≥22 | ≥450 | 2-8 |
Data Sheet
Grades | Density g/cm³ | Hardness HRC | MPa Tensile strength MPa | Elongation% | MJ/m² Impact toughness MJ/m² |
W273 | 17.10±0.15 | ≥23 | ≥900 | ≥24 | ≥1.30 |
W263 | 17.25±0.15 | ≥23 | ≥900 | ≥23 | ≥1.20 |
W253 | 17.40±0.15 | ≥24 | ≥900 | ≥22 | ≥1.10 |
W243 | 17.60±0.15 | ≥24 | ≥920 | ≥20 | ≥0.90 |
W232 | 18.10±0.15 | ≥25 | ≥920 | ≥14 | ≥0.45 |
W231 | 18.30±0.15 | ≥26 | ≥920 | ≥12 | ≥0.30 |
W221 | 18.50±0.15 | ≥27 | ≥920 | ≥10 | ≥0.22 |
WNiCu | 16.00-18.50 | ≥22 | ≥450 | 2-8 |
