High-Density Tungsten Alloy Plates - Custom Manufacturer & Supplier in China | Quality Factory Direct
Introduction of Tungsten Alloy Plate
| Width * Length | (2.0-250.0mm) * (2.0-250.0mm) |
| Thickness | 2mm - 15mm |
| Density | 15.8 - 18.75 g/cm³ |
| Composition | W content: 85-99%, W-Ni-Fe, W-Ni-Cu |
| Surface | Sintering surface, Forged surface, Ground surface |
Tungsten alloy plates are produced by good processing property billets and special cold and hot rolling technology; they can be used to make tungsten target, tungsten heat elements, tungsten radiation shields and tungsten channels for electronics, lightening, electro-vacuum industries.
Tungsten alloy plates play very important role in manufacturing of collimator for nuclear medicine, nuclear research, geological prospecting and security inspection. These materials provide reliable protection against X-rays and gamma radiation.
Applications for Tungsten Alloy Plate
Sports Goods
Professional tungsten alloy plate for darts benchmarking. Fishing sinkers: bullet type, water drop type, pipe type etc.
Counterweights
High-density tungsten alloy plates used as counterweigh in various field, such as counterweight of mechanical hammer; fly hammer; oil drilling platform; darts rod, car counterweight piece etc.
Electrode Material
It can be made into electrode, welding rod, electrical contact and pneumatic breaker.
Electronic Sealing Piece
Due to its favorable high temperature resistance and thermal properties, electronic industry starts to adopt tungsten alloy plate as electronic sealing piece. Electrical discharge machining of electrode and resistance welding electrode; high proportion electrical contacts, air circuit breaker in the contacts.
Radiation Shielding & Medical
It can be machined into X-ray target material, collimator, nuclear container, syringe shielding etc.
Thickness Classification Standards
Thickness of less than 0.005 in. (0.13 mm).
Thickness less than or equal to 0.187 in. (4.75 mm) or greater than or equal to 0.005 in. (0.13 mm).
Thickness greater than or equal to 0.188 in. (4.75 mm).
Frequently Asked Questions (FAQ)
The width and length range from (2.0-250.0mm) * (2.0-250.0mm), thickness spans 2mm to 15mm, and density ranges between 15.8 and 18.75 g/cm³.
Tungsten content ranges from 85% to 99% in W-Ni-Fe and W-Ni-Cu alloys. Available surface finishes include sintering surface, forged surface, and ground surface.
Foil has a thickness under 0.005 in. (0.13 mm); Sheet ranges from 0.005 in. (0.13 mm) to 0.187 in. (4.75 mm); Plate is defined as having a thickness of 0.188 in. (4.75 mm) or greater.
Due to high density, they provide reliable protection against X-rays and gamma radiation, making them essential for collimators in nuclear medicine, nuclear research, geological prospecting, and security inspection.
They are widely utilized in sports goods (darts, fishing sinkers), counterweights (drilling platforms, fly hammers), electrodes/welding rods, electronic sealing pieces, and nuclear/medical shielding components.
They are produced using high-quality processing billets combined with specialized cold and hot rolling technologies.