High-Density Tungsten Alloy Plates - Custom Factory and Suppliers in China
Introduction of Tungsten Alloy Plate
| Width * Length | (2.0-250.0mm) * (2.0-250.0mm) |
| Thickness | 2mm - 15mm |
| Density | 15.8 - 18.75 g/cm³ |
| Composition | W content: 85-99%, W-Ni-Fe, W-Ni-Cu |
| Surface | Sintering surface, Forged surface, Ground surface |
Tungsten alloy plates are produced by good processing property billets and special cold and hot rolling technology; they can be used to make tungsten target, tungsten heat elements, tungsten radiation shields and tungsten channels for electronics, lightening, electro-vacuum industries.
Tungsten alloy plates play very important role in manufacturing of collimator for nuclear medicine, nuclear research, geological prospecting and security inspection. These materials provide reliable protection against X-rays and gamma radiation.
Applications for Tungsten Alloy Plate
Sports Goods
Professional tungsten alloy plate for darts benchmarking. Fishing sinkers: bullet type, water drop type, pipe type etc.
Counterweights
High-density tungsten alloy plates used as counterweight in various fields, such as mechanical hammer; fly hammer; oil drilling platform; darts rod, car counterweight piece etc.
Electrode Material
Can be made into electrode, welding rod, electrical contact and pneumatic breaker.
Electronic Sealing Piece
Due to its favorable high temperature resistance and thermal properties, electronic industry starts to adopt tungsten alloy plate as electronic sealing piece; electrical discharge machining of electrode and resistance welding electrode; high proportion electrical contacts, air circuit breaker in the contacts.
Radiation Shielding & Medical
Can be machined into X-ray target material, collimator, nuclear container, syringe shielding etc.
The Thickness of the Tungsten Alloy Plate is as Follows
A thickness of less than 0.005 in. (0.13 mm).
Thickness less than or equal to 0.187 inches (4.75 mm) or greater than or equal to 0.005 inches (0.13 mm).
Thickness greater than or equal to 0.188 inches (4.75 mm).
Frequently Asked Questions
Q: What is the typical density and composition of a tungsten alloy plate?
The standard density ranges from 15.8 to 18.75 g/cm³. The composition features a tungsten (W) content of 85-99%, typically alloyed as W-Ni-Fe or W-Ni-Cu.
Q: How are tungsten alloy foil, sheet, and plate categorized by thickness?
They are classified as Foil (thickness
Q: What surface finishes are available for tungsten alloy plates?
Tungsten alloy plates can be supplied with a Sintering surface, a Forged surface, or a Ground surface depending on application requirements.
Q: How do tungsten alloy plates provide radiation shielding?
Due to their high density, they provide reliable protection against X-rays and gamma radiation. They are widely machined into collimators, X-ray targets, nuclear containers, and syringe shielding for nuclear medicine, research, and security inspection.
Q: What are the major industrial counterweight applications?
Thanks to their high density, they serve as counterweights for mechanical hammers, fly hammers, oil drilling platforms, dart rods, and automotive counterweight components.
Q: What manufacturing process is used to produce tungsten alloy plates?
They are manufactured using high-quality billets combined with specialized cold and hot rolling technology to ensure optimal processing and mechanical properties.