| Material: | |
|---|---|
| Density: | |
| Quantity: | |
TGS-S-7003
ZZJD
8414909090
Product Description
Compared with square tungsten bar, tungsten alloy cylinder is more popular because machining and production is easier. It is easier to take it from the mold after press which means less damage. Moreover, it is more suitable for further machining.
Applications for Tungsten Alloy Cylinders
Tungsten alloy cylinders can be easily used for car weighting by drilling one or more 25/64" or larger diameter holes into the block and then inserting the desired number of cylinders. The hole can then be plugged with a piece of 3/8 inch dowel rod. The product also is manufactured as the parts of military defense, extrusion die, various counterweights, such as yacht counterweights, vehicle counterweights, airplane counterweights, helicopter counterweights, boat counterweights, tank counterweights, etc.
Usually, tungsten alloy cylinder could be manufactured as the parts for military applications, extrusion die and various kinds of counterweights.
Tungsten Alloy Cylinder
1. Diameter: 2.0-100.0mm
2. Length: 50-1000mm
3. Density: 16.5-18.75 g/cm3
4. Composition: W content: 85-99%, W-Ni-Fe, W-Ni-Cu
5. Surface: Sintered surface, Forged surface, Ground surface
Data Sheet
Grades | Density g/cm³ | Hardness HRC | Tensile strength MPa | Elongation% | Impact toughness MJ/m² |
W273 | 17.10±0.15 | ≥23 | ≥900 | ≥24 | ≥1.30 |
W263 | 17.25±0.15 | ≥23 | ≥900 | ≥23 | ≥1.20 |
W253 | 17.40±0.15 | ≥24 | ≥900 | ≥22 | ≥1.10 |
W243 | 17.60±0.15 | ≥24 | ≥920 | ≥20 | ≥0.90 |
W232 | 18.10±0.15 | ≥25 | ≥920 | ≥14 | ≥0.45 |
W231 | 18.30±0.15 | ≥26 | ≥920 | ≥12 | ≥0.30 |
W221 | 18.50±0.15 | ≥27 | ≥920 | ≥10 | ≥0.22 |
WNiCu | 16.00-18.50 | ≥22 | ≥450 | 2-8 |
